Siemens SCALANCE W1750D UI Configuration Manual Download Page 390

Page: 390 / 570

Services

24.1 Configuring AirGroup

SCALANCE W1750D UI

390

Configuration Manual, 02/2018, C79000-G8976-C451-02

In the SCALANCE W UI
To enable AirGroup and its services:
1.

Click the More > Services link on the SCALANCE W main window.

Click the Air Group tab.

Figure 24-5 AirGroup Configuration

To enable support for Bonjour services, select the Enable Bonjour check box and select

the AirGroup services related to Bonjour as required.

To enable DLNA support, select the Enable DLNA check box and select the DLNA

services.

To allow the users to use Bonjour services enabled in a guest VLAN, select Enable Guest

Bonjour multicast. When this check box is enabled, the Bonjour devices are visible only in

the guest VLAN and AirGroup will not discover or enforce policies in guest VLAN.

Select the Enable Air Group across mobility domains check box to enable inter-cluster

mobility. When enabled, the AP shares the mDNS database information with the other

Summary of Contents for SCALANCE W1750D UI



























































































































































































































































































































































































































































































































































































Search results

Summary of Contents for SCALANCE W1750D UI

Reviews:

Related manuals for SCALANCE W1750D UI

Brands by name

Popular brands

Siemens SCALANCE W1750D UI, Configuration Manual

Search results

Summary of Contents for SCALANCE W1750D UI

Reviews:

Related manuals for SCALANCE W1750D UI

Brands by name

Popular brands