Siemens SCALANCE W1750D UI Configuration Manual Download

Page: 347 / 570

Adaptive Radio Management

21.2 Configuring ARM Features on an AP

SCALANCE W1750D UI
Configuration Manual, 02/2018, C79000-G8976-C451-02

347

21.2.4

Access Point Control

You can configure access point control parameters through the SCALANCE W UI or the CLI.
In the SCALANCE W UI
To configure band steering:
1.

For Access Point Control, specify the following parameters in the RF > ARM > Show

advanced options tab:

Parameter

Description

Customize Valid Channels

Select this check box to customize valid channels for 2.4 GHz and 5

GHz. By default, the AP uses valid channels as defined by the Country

Code (regulatory domain). On selecting the Customize Valid Channels

check box, a list of valid channels for both 2.4 GHz and 5 GHz are dis-

played. The valid channel customization feature is disabled by default.

Minimum Transmit Power

Specify the minimum transmission power. The value specified for Mini-

mum Transmit Power indicates the minimum Effective Isotropic Radiated

Power (EIRP) that can range from 3 dBm to 33 dBm in 3 dBm incre-

ments. If the minimum transmission EIRP setting configured on an AP is

not supported by the AP model, this value is reduced to the highest

supported power setting. The default value for minimum transmit power

is 18 dBm.

Maximum Transmit Power

Specify the maximum transmission power. The value specified for Max-

imum Transmit Power indicates the maximum Effective Isotropic Radiat-

ed Power (EIRP) that can range from 3 dBm to 33 dBm in 3 dBm

increments. If the maximum transmission EIRP configured on an AP is

not supported by the AP model, the value is reduced to the highest sup-

ported power setting. The default value for maximum transmit power is

127 dBm.

Client aware

When Enabled, ARM does not change channels for the APs with active

clients, except for high-priority events such as RADAR or excessive

noise. This feature must be enabled in most deployments for a stable

WLAN. If the Client Aware mode is Disabled, the AP may change to a

more optimal channel, that may disrupt the current client traffic for a

while. The Client aware option is Enabled by default.
NOTE: When Client aware is disabled, channels can be changed even

when the clients are active on a BSSID.

Scanning

Select Enabled so that the AP dynamically scans all 802.11 channels

within its
802.11 regulatory domain at regular intervals and reports to the AP. This

scanning report includes WLAN coverage, interference, and intrusion

detection data.
NOTE: For client match configuration, ensure that scanning is enabled.

Summary of Contents for SCALANCE W1750D UI



























































































































































































































































































































































































































































































































































































Search results

Summary of Contents for SCALANCE W1750D UI

Reviews:

Related manuals for SCALANCE W1750D UI

Brands by name

Popular brands

Siemens SCALANCE W1750D UI, Configuration Manual

Search results

Summary of Contents for SCALANCE W1750D UI

Reviews:

Related manuals for SCALANCE W1750D UI

Brands by name

Popular brands