manualshive.com logo in svg

Siemens SCALANCE W1750D UI, Configuration Manual

The Siemens SCALANCE W1750D UI Configuration Manual is a comprehensive guide that assists users in setting up and optimizing the performance of their SCALANCE W1750D UI network device. This manual is available for free download on manualshive.com, ensuring easy access to detailed instructions and configuration settings.

Share
Download
background image

Roles and Policies 

 

15.1 Firewall Policies 

 

SCALANCE W1750D UI 

248

 

Configuration Manual, 02/2018, C79000-G8976-C451-02 

4.

 

To create a new rule for the network, click New. To create an access rule for a user role, 

select the user role and then click New. The New Rule window is displayed. 

5.

 

In the New Rule window, perform the following steps: 
–

 

Select Access control from the Rule type drop-down list. 

–

 

Select Source-NAT from the Action drop-down list, to allow for making changes to the 

source IP address. 

–

 

Select a service from the list of available services. 
Default: All client traffic by default will be directed to the native vlan. 
Tunnel: All network-based traffic will be directed to the VPN tunnel. 
VLAN: All client based traffic will be directed to the specified uplink VLAN using the IP 

address of the interface that AP has on that VLAN. If the interface is not found, this 

option has no effect. 

–

 

Select the required option from the Destination drop-down list. 

–

 

If required, enable other parameters such as Log, Blacklist, Classify media, Disable 

scanning, DSCP tag, and 802.1p priority. 

–

 

Click OK. 

6.

 

Click Finish. 

In the CLI 
To configure source-NAT access rule: 

(scalance)(config)# wlan access-rule <access_rule>

 

(scalance)(Access Rule "<access_rule>")# rule <dest> <mask> <match> <protocol> 
<sport> <eport> src-nat [vlan <vlan_id>|tunnel] 

 

(scalance)(Access Rule "<access_rule>")# end 

 

(scalance)# commit apply

 

Configuring Policy-Based Corporate Access 

To allow different forwarding policies for different SSIDs, you can configure policy-based 

corporate access. The configuration overrides the routing profile configuration and allows 

any destination or service to be configured to have direct access to the Internet (bypassing 

VPN tunnel) based on the ACL rule definition. When policy- based corporate access is 

enabled, the VC performs source-NAT by using its uplink IP address. 
To configure policy-based corporate access: 
1.

 

Ensure that an L3 subnet with netmask, gateway, VLAN, and IP address is configured. 

For more information on configuring L3 subnet, see Configuring L3-Mobility  (Page 455). 

2.

 

Ensure that the source IP address is associated with the IP address configured for the L3 

subnet. 

3.

 

Create an access rule for the SSID profile with Source-NAT action as described in 

Configuring a Source-NAT Access Rule. The source-NAT pool is configured and 

corporate access entry is created 

Summary of Contents for SCALANCE W1750D UI



























































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for SCALANCE W1750D UI

T-Mobile tm-g5240 - T-mobile Hotspot Wireless Quick Install Manual preview
tm-g5240 - T-mobile Hotspot Wireless
Brand: T-Mobile Pages: 2
InfiNet Wireless Quanta 5 Technical User'S Manual preview
Quanta 5
Brand: InfiNet Wireless Pages: 100
Ubiquiti GigaBeam Quick Start Manual preview
GigaBeam
Brand: Ubiquiti Pages: 22
Watchguard WGA15731 Hardware Manual preview
WGA15731
Brand: Watchguard Pages: 28
EnGenius EAP1250 User Manual preview
EAP1250
Brand: EnGenius Pages: 73
PROLiNK PRT7010L Quick Installation Manual preview
PRT7010L
Brand: PROLiNK Pages: 28
Datacom DM984-100B Administration Manual preview
DM984-100B
Brand: Datacom Pages: 105
Loopcomm LP-9776GR User Manual preview
LP-9776GR
Brand: Loopcomm Pages: 2
Arista AP-C230E Getting Started Manual preview
AP-C230E
Brand: Arista Pages: 4
Connect One Wi-REACH Classic User Manual preview
Wi-REACH Classic
Brand: Connect One Pages: 38
ADB P.DGA4001N Hardware User Manual preview
P.DGA4001N
Brand: ADB Pages: 35
ADB DB 6520 Instruction And User'S Manual preview
DB 6520
Brand: ADB Pages: 38
Trust 13597 Manual preview
13597
Brand: Trust Pages: 14
Trust 350BR User Manual preview
350BR
Brand: Trust Pages: 21
Rutenbeck Up-Accesspoint UAE PoE 2,4 GHz 300M rw Mounting Instructions preview
Up-Accesspoint UAE PoE 2,4 GHz 300M rw
Brand: Rutenbeck Pages: 3
Quantum QN-I-220 Quick Setup Manual preview
QN-I-220
Brand: Quantum Pages: 18
Check Point 1550 Quick Start Manual preview
1550
Brand: Check Point Pages: 2
6Harmonics GWS-3000 Operating Manual preview
GWS-3000
Brand: 6Harmonics Pages: 31

Brands by name

Popular brands

Load more brands