Siemens SCALANCE W1750D UI Configuration Manual Download

Page: 275 / 570

Roles and Policies

15.4 Configuring Derivation Rules

SCALANCE W1750D UI
Configuration Manual, 02/2018, C79000-G8976-C451-02

275

15.4.4

Configuring VLAN Derivation Rules

The VLAN derivation rules allow administrators to assign a VLAN to the AP clients based on

the attributes returned by the RADIUS server.
You can configure VLAN derivation rules for an SSID profile by using the SCALANCE W UI

or the CLI.
In the SCALANCE W UI
To configure VLAN derivation rules:
1.

Perform the following steps:
–

To configure VLAN derivation rule for a WLAN SSID profile, navigate to Network >

New > New WLAN > VLAN or Network > edit > Edit <WLAN-profile> > VLAN. Select

the Dynamic option under the Client VLAN assignment.

–

To configure VLAN derivation rule for a wired network profile, navigate to Wired > New

> New Wiredor . The tab contents are displayed.

Click New to create a VLAN assignment rule. The New VLAN Assignment Rule window is

displayed. In this window, you can define a match method by which the string in

Operand

is matched with the attribute values returned by the authentication server.

Figure 15-7 VLAN Assignment Rule Window

Select the attribute from the Attribute drop-down list. The list of supported attributes

includes RADIUS attributes, dhcp-option, dot1x-authentication-type, mac-address, and

mac-address-and-dhcp-options. For information on a list of RADIUS attributes, see

RADIUS Server Authentication with VSA. (Page 209)

Summary of Contents for SCALANCE W1750D UI



























































































































































































































































































































































































































































































































































































Search results

Summary of Contents for SCALANCE W1750D UI

Reviews:

Related manuals for SCALANCE W1750D UI

Brands by name

Popular brands

Siemens SCALANCE W1750D UI, Configuration Manual

Search results

Summary of Contents for SCALANCE W1750D UI

Reviews:

Related manuals for SCALANCE W1750D UI

Brands by name

Popular brands