Siemens SCALANCE W1750D UI Configuration Manual Download

Page: 339 / 570

AP-VPN Deployment

20.2 Configuring AP and Controller for AP-VPN Operations

SCALANCE W1750D UI
Configuration Manual, 02/2018, C79000-G8976-C451-02

339

b3c65c...

1(10.15.205.0-10.15.205.250,5),2(10.15.206.1-10.15.206.252,5)

b3c65c...

14(10.15.205.0-10.15.205.250,5),15(10.15.206.1-10.15.206.252,5)

The output of this command provides the following information:

Table 20- 3 Branch Details

Parameter

Description

Name

Displays the name of the branch.

VC MAC

Address

Displays the MAC address of the VC of the branch.

Status

Displays the current status of the branch (UP/DOWN).

Inner IP

Displays the internal VPN IP of the branch.

Assigned Subnet

Displays the subnet mask assigned to the branch.

Assigned Vlan

Displays the VLAN ID assigned to the branch.

Key

Displays the key for the branch, which is unique to each branch.

Bid(Subnet Name)

Displays the Branch ID (BID) of the subnet.

In the example above, the controller displays bid-per-subnet-per-branch i.e., for

"LA" branch, BID "2" for the ip-range "10.15.205.0-10.15.205.250" with client

count per branch "5"). If a branch has multiple subnets, it can have multiple

BIDs.
If a branch is in UP state and does not have a Bid(Subnet Name), it means that

the AP is connected to a controller, which did not assign any BID for any subnet.

In the above example, "Paris-CB:D3:16" branch is UP and does not have a

Bid(Subnet Name). This means that either the AP is connected to a backup

controller or it is connected to a primary controller without any Distributed, L2 or

Distributed, L3 subnets.

Note
The command output does not display the Key and Bid(Subnet Name) details.

Summary of Contents for SCALANCE W1750D UI



























































































































































































































































































































































































































































































































































































Search results

Summary of Contents for SCALANCE W1750D UI

Reviews:

Related manuals for SCALANCE W1750D UI

Brands by name

Popular brands

Siemens SCALANCE W1750D UI, Configuration Manual

Search results

Summary of Contents for SCALANCE W1750D UI

Reviews:

Related manuals for SCALANCE W1750D UI

Brands by name

Popular brands