Siemens SCALANCE W1750D UI Configuration Manual Download

Page: 420 / 570

AP Management and Monitoring

25.1 Managing an AP from AirWave

SCALANCE W1750D UI

420

Configuration Manual, 02/2018, C79000-G8976-C451-02

PSK-Based and Certificate-Based Authentication

On the DHCP server, two formats for option 43 are supported:

●

If you select this format, the AP authenticates the AMP server using the Pre-Shared Key

(PSK) login process.

●

If you select this format, the AP resolves the AirWave domain name into one or two IP

addresses as AirWave Primary or AirWave Backup, and then AP starts a certificate-

based authentication with AMP server, instead of the PSK login. When the AMP domain

name is used, the AP performs certificate-based authentication with the AMP server. The

AP initiates a Secure Socket Layer (SSL) connection with the AirWave server. The

AirWave server verifies the signature and public key certificate from the AP. If the

signature matches, the AirWave responds to the AP with the login request.

Configurable Port for AP and AirWave Management Server Communication

You can now customize the port number of the AMP server through the

server_host:server_port format, for example, amp.siemens.com:4343.
The following example shows how to configure the port number of the AMP server:

24:de:c6:cf:63:60 (config) # ams-ip 10.65.182.15:65535

24:de:c6:cf:63:60 (config) # end

24:de:c6:cf:63:60# commit apply

Summary of Contents for SCALANCE W1750D UI



























































































































































































































































































































































































































































































































































































Search results

Summary of Contents for SCALANCE W1750D UI

Reviews:

Related manuals for SCALANCE W1750D UI

Brands by name

Popular brands

Siemens SCALANCE W1750D UI, Configuration Manual

Search results

Summary of Contents for SCALANCE W1750D UI

Reviews:

Related manuals for SCALANCE W1750D UI

Brands by name

Popular brands