Wired Profiles
12.2 Assigning a Profile to Ethernet Ports
SCALANCE W1750D UI
Configuration Manual, 02/2018, C79000-G8976-C451-02
155
To configure unrestricted access:
(scalance)(config)# wired-port-profile <name>
(scalance)(wired ap profile <name>)# set-role-unrestricted
(scalance)(wired ap profile <name>)# end
(scalance)# commit apply
12.2
Assigning a Profile to Ethernet Ports
You can assign profiles to Ethernet ports using the SCALANCE W UI or the CLI.
In the SCALANCE W UI
To assign profiles to Ethernet ports:
1.
Click the Wired link under More on the SCALANCE W main window. The Wired window
is displayed.
2.
To assign an Ethernet downlink profile to Ethernet 0 port:
–
Ensure that the wired bridging on the port is enabled. For more information, see
Configuring Wired Bridging on Ethernet 0 for Mesh Point (Page 454).
–
Select and assign a profile from the 0/0 drop-down list.
–
To assign a wired profile to Ethernet 0/1 port, select the profile from the 0/1 drop-down
list.
–
If the AP supports E2, E3, and E4 ports, assign profiles to other Ethernet ports by
selecting a profile from the 0/2, 0/3, and 0/4 drop-down lists.
In the CLI
To assign profiles to Ethernet ports:
(scalance)(config)# enet0-port-profile <name>
(scalance)(config)# enet1-port-profile <name>
(scalance)(config)# enet2-port-profile <name>
(scalance)(config)# enet3-port-profile <name>
(scalance)(config)# enet4-port-profile <name>
(scalance)(config)# end
(scalance)# commit apply
