Siemens SCALANCE W1750D UI Configuration Manual Download Page 32

Page: 32 / 570

Setting up an AP

4.2 Provisioning an AP

SCALANCE W1750D UI

Configuration Manual, 02/2018, C79000-G8976-C451-02

Connecting to a Provisioning Wi-Fi Network

The APs boot with factory default configuration and try to provision automatically. If the

automatic provisioning is successful, the SCALANCE W SSID will not be available. If

AirWave is not reachable and the automatic provisioning fails, the SCALANCE W SSID

becomes available and the users can connect to a provisioning network by using the

SCALANCE W SSID.
To connect to a provisioning Wi-Fi network:
1.

Ensure that the client is not connected to any wired network.

Connect a wireless-enabled client to a provisioning Wi-Fi network: for example, scalance.

If the Windows operating system (OS) is used:
–

Click the wireless network connection icon in the system tray. The Wireless Network

Connection window is displayed.

–

Click the SCALANCE W network and then click Connect.

If the Mac OS system is used:
–

Click the AirPort icon. A list of available Wi-Fi networks is displayed.

–

Click the SCALANCE W network.

Note
The SCALANCE W SSIDs are broadcast in 2.4 GHz only.

AP Cluster

APs in the same VLAN automatically find each other and form a single functioning network

managed by a VC.

Note
Moving an AP from one cluster to another requires a factory reset of the AP.

Summary of Contents for SCALANCE W1750D UI



























































































































































































































































































































































































































































































































































































Search results

Summary of Contents for SCALANCE W1750D UI

Reviews:

Related manuals for SCALANCE W1750D UI

Brands by name

Popular brands

Siemens SCALANCE W1750D UI, Configuration Manual

Search results

Summary of Contents for SCALANCE W1750D UI

Reviews:

Related manuals for SCALANCE W1750D UI

Brands by name

Popular brands