Mobility and Client Management
29.2 Configuring L3-Mobility
SCALANCE W1750D UI
Configuration Manual, 02/2018, C79000-G8976-C451-02
459
7.
Click New in the Subnets section and specify the following:
–
Enter the client subnet in the IP address text box.
–
Enter the mask in the Subnet mask text box.
–
Enter the VLAN ID of the home network in the VLAN ID text box.
–
Enter the home VC IP address for this subnet in the Virtual controller IP text box.
8.
Click OK.
In the CLI
To configure a mobility domain:
(scalance)(config)# l3-mobility
(scalance)(L3-mobility)# home-agent-load-balancing
(scalance)(L3-mobility)# virtual-controller <IP-address>
(scalance)(L3-mobility)# subnet <IP-address> <subnet-mask> <VLAN-ID> <virtual-
controller-IP- address>
(scalance)(L3-mobility)# end
(scalance)# commit apply