![background image](http://html.mh-extra.com/html/d-link/dwr-910/dwr-910_technical-support-setup-procedure_78739001.webp)
Technical Support Setup Procedure
Page 1 of 3
How to perform firmware upgrade of DWR-910?
Note:
By default, the network name(SSID) of the DWR-910 will be in the format
dlink_DWR_910_xxxx
where “
xxxx
” represents the last 4 characters of the
DWR-910’s MAC Address. Please find the default SSID and password on the
product label pasted on the device.
Step 1
Ensure that the device is turned on and the desired SSID is found in the list
of Wireless Networks on your Wireless Computer.
Step 2
Select the DWR-910’s Wireless Network Name. Click on
Connect
as shown.
Step 3
Please key in the corresponding
WiFi Key
as found on the label. Click
OK
to
proceed.