![background image](http://html.mh-extra.com/html/sick/8027513/8027513_operating-instructions-manual_1264195029.webp)
TRANSPORT, SETUP, AND MOUNTING
4
29
8027513/V1-0/2022-03|SICK
Subject to change without notice
O P E R A T I N G I N S T R U C T I O N S | MDA Vision
4.3
Assembling MDA Vision
4.3.1
Setting up base plate
The MDA Vision is placed on a table and assembled there.
Using a height-adjustable table so that the operating height can later be optimally
adjusted to the user is also recommended.
NOTE
The table must be levelled, stable, large enough to accommodate the unit, and
secured against rolling away.
DANGER!
RISK OF INJURY DUE TO DEVICE TIPPING OVER
There is a risk of the MDA Vision tipping over during assembly work.
The device tipping over can lead to the severe crushing or even loss of limbs. There is
also the risk of inflicting damage to the device.
▸
Place the base plate on a stable and non-tilting table.
▸
Secure the table to prevent rolling away.
DANGER!
DANGER OF CRUSHING WHEN SETTING DOWN THE BASE PLATE
The adjustable feet are designed so that the safety distance between the bottom of the
device and the tabletop can be observed.
There is a risk of crushing when placing the base plate on the tabletop.
▸
Do not put your hands under the base of the housing when installing the base plate.
Fig. 23: Setting up the base plate
▸
Place the base plate with Connection Box and preassembled support tube on a table.
NOTE
The six adjustable feet must be fully positioned on the tabletop.
Structure