OPERATION
7
71
8027513/V1-0/2022-03|SICK
Subject to change without notice
O P E R A T I N G I N S T R U C T I O N S | MDA Vision
7.7.4
Object too big/too small
•
No dimensional values are determined.
•
The
Object too small
or
Object too large
appears in the status line, each with a note
indicating which dimension does not correspond to the permissible dimensions.
•
In the figure above, the object width is smaller than the minimum width allowed.
•
One or more object dimensions exceed or fall short of the permissible dimensions.
•
The object is too large or too small.
▸
Only measure objects whose dimensions correspond to the technical data.
Error description
Fault cause
Solution