![background image](http://html.mh-extra.com/html/sick/8027513/8027513_operating-instructions-manual_1264195049.webp)
COMMISSIONING
6
49
8027513/V1-0/2022-03|SICK
Subject to change without notice
O P E R A T I N G I N S T R U C T I O N S | MDA Vision
6.2.4
Code reading configuration
The
Code reading
page is used to select the devices used for code reading and the code
types to be decoded.
▸
Select the reader used in the Source field.
•
Lector
: Only a Lector6xx camera reader is used for code reading.
•
Lector and hand-held
: A connected mobile hand-held scanner can optionally be used
for manual code recording.
•
Mobile hand-held scanner
: Code recoding can only be performed with a connected
mobile hand-held scanner.
▸
In the
Active Decoders
area, select all code types that are to be decoded in principle.
NOTE
Specifying multiple active decoders slows down the reading process, since the
corresponding codes must be searched for in the image.
If a mobile hand-held scanner is connected, a configuration code (2D) is displayed on the
right side.
▸
Read the displayed code with the mobile hand-held scanner. The mobile hand-held
scanner is activated.
NOTE
No other settings need to be made on the mobile hand-held scanner. The mobile
hand-held scanner is configured at the factory.
Selecting the scanner
Setting code type(s)
Configuring mobile
hand-held scanner