![background image](http://html.mh-extra.com/html/sick/8027513/8027513_operating-instructions-manual_1264195069.webp)
OPERATION
7
69
8027513/V1-0/2022-03|SICK
Subject to change without notice
O P E R A T I N G I N S T R U C T I O N S | MDA Vision
7.7.2
No code reading
•
The object was brought into the field of view of the sensors and placed on the scale.
•
The weight value is displayed. However, the Lector6xx could not determine a code.
•
The
Place the Code nearby the aiming Laser
appears in the status line.
•
The code type has not been activated.
•
The code is too small.
•
This can happen especially with flat and small objects.
▸
Remove the object from the scale again. This starts a new measurement process.
▸
Hold the object in the reading field at a small distance from the Lector.
The red laser dots (or the red laser cross) visible on the object make it easier to align
the object for successful code reading.
•
As soon as the code could be read, it is displayed in the Lector window.
•
After setting down on the scale, the measured values are then determined.
•
Check if the code type is activated in the configuration area in the
Code reading
tab.
Error description
Fault cause
Solution