![background image](http://html.mh-extra.com/html/sick/8027513/8027513_operating-instructions-manual_1264195050.webp)
6
COMMISSIONING
50
8027513/V1-0/2022-03|SICK
O P E R A T I N G I N S T R U C T I O N S | MDA Vision
Subject to change without notice
6.2.5
Configuration of the data output
The
Output Data
page is used to configure TCP/IP or FTP data transmission. The MDA
Vision can be configured as a TCP/IP server or client. Alternatively, the results can be
transmitted to a server via FTP client.
The measurement results are retrieved from an external TCP/IP server.
•
Device IP
: IP address of the MDA Vision. The MDA Vision is addressed from the
external server via this IP address.
•
Client port
: Port through which an external server communicates with the MDA Vision.
The measurement results are transmitted from the MDA Vision to an external TCP/IP
client.
•
Server IP to connect
: IP address of the client to which the MDA Vision must connect.
•
Server port
: Port through which the MDA Vision communicates with the client.
•
The MDA Vision can alternatively be configured as an FTP client.
•
The file name and the file extension are fixed (see the
Customer Interface Description
supplement).
NOTE
Either TCP/IP OR FTP data transmission is possible. Both transmission types cannot
be set up in parallel.
▸
Tap
Test
output
.
The sample data string is output via the selected interface.
NOTE
This can be used to check whether the MDA Vision can establish a connection and
whether a result arrives in the customer system.
•
Depending on the application, personal data can be processed with the MDA Vision.
NOTE
In this case, secure communication protocol must be selected.
Configuring MDA Vision
as TCP/IP client
Configuring MDA Vision
as TCP/IP server
FTP output
Testing data output
Safe communication