![background image](http://html.mh-extra.com/html/sick/8027513/8027513_operating-instructions-manual_1264195008.webp)
2
FOR YOUR SAFETY
8
8027513/V1-0/2022-03|SICK
O P E R A T I N G I N S T R U C T I O N S | MDA Vision
Subject to change without notice
2
For your safety
2.1
Intended use
MDA Vision is a stationary DWS (
D
imensioning-
W
eighing-
S
canning) system.
It enables master data for products to be logged in a standardized manner for goods
entering or leaving a warehouse/facility. The products are measured, weighed, identified,
and visualized in a single operation.
The master data set can be supplemented to include additional information such as
information on the measurement staff or location or on company-specific object
information.
The processing of the data takes place in real time.
With the WLAN module available as an accessory, data can be output independent of the
location.
NOTE
Intended use also includes observance of this system description, in particular the
safety notes as well as the repair and maintenance requirements.
The default state of the MDA Vision when shipped out of factory is set to decode a single
code.
NOTE
If multiple codes or special reading conditions are determined, SICK Service should
be scheduled to configure and commission the system.
2.2
General safety notes
▸
Please read this document through carefully and observe all the safety notes and
information before working with the MDA Vision.
▸
Only qualified persons from the relevant departments are permitted to work on the
MDA Vision.
▸
Follow operating processes.
▸
Follow local regulations.
▸
Follow all local regulations relating to working with electrical components.
•
Only authorized persons are permitted to access the MDA Vision.
System damage/transport damage
Damage to the individual components can lead to the malfunction of the whole system.
▸
Do not ignore any damage caused to system components during transport.
▸
In case of damage, contact SICK Service.
Note on code reading