![background image](http://html.mh-extra.com/html/sick/8027513/8027513_operating-instructions-manual_1264195025.webp)
SYSTEM DESCRIPTION
3
25
8027513/V1-0/2022-03|SICK
Subject to change without notice
O P E R A T I N G I N S T R U C T I O N S | MDA Vision
3.10
Operating principle
Fig. 19: Operating principle
Legend
1
Starting measurement
▸
Bring the object into view of the 3D snapshot camera.
The Lector6xx image-based code reader is activated. LED illumination and
aiming laser are switched on.
2
Automatic code reading
MDA Vision is factory-supplied to decode a single code. The code can be of
different types.
If there are several codes on the object, they cannot be reliably detected.
NOTE
If special conditions or detection logics are required by the customer,
contact SICK Service.
Manual code reading
Enter code on screen or record with mobile hand-held scanner if automatic
code reading is unsuccessful.
3
Measurement value determination
▸
Place the object on the scale after successful code reading.
▸
Release object.
As soon as the object is free on the scale, weight and dimension values are
determined and displayed.
4
Data output and output of the camera images
Immediate output of measurement and read data as well as camera
images when a network connection is established.
With the WLAN module available as an accessory, data can be output
independently of the location.
5
Completing measurement process
Remove the object from the scale.
All measured values are reset to zero.