![background image](http://html.mh-extra.com/html/sick/8027513/8027513_operating-instructions-manual_1264195062.webp)
7
OPERATION
62
8027513/V1-0/2022-03|SICK
O P E R A T I N G I N S T R U C T I O N S | MDA Vision
Subject to change without notice
7.5
Perform measurement with additional informatio
n (“custom fields”)
•
Additional fields (so-called custom fields) allow the master data record to be
supplemented with customer-specific information, such as information about the
personnel recording the measurements, site location or company-specific object
information (for instance, Hazmat, Fragile etc.).
•
The input takes place immediately after the measured value determination is
completed.
•
Data output only occurs after the additional information has been entered.
•
The detected customer-specific data is transmitted to the customer system together
with the object master data after the measurement.
If additional fields have been configured, the change to the
Custom Fields
tab takes
place immediately after the measurement value determination has been completed.
The defined additional fields are either empty or they contain the entries made before
the last measurement.
For configuration of the additional fields, see section
8.2.6 Defining customer-specific
There are three types of additional fields:
•
Text fields
enable the input of alphanumeric characters. Tap in the field to enter.
A keyboard is displayed.
•
Only numbers can be entered in
numeric fields
. The input is made via the displayed
keyboard here as well.
•
Manual input is not possible in
selection list fields
. A predefined list entry must be
selected.
Getting started
Field types