NOTES AND STATUS MESSAGES
10
93
8027513/V1-0/2022-03|SICK
Subject to change without notice
O P E R A T I N G I N S T R U C T I O N S | MDA Vision
10
Notes and status messages
Message
Recommended approach
Device <NAME> is missing.
▸
Restart MDA Vision. To do this, switch the device off and on again
at the main switch.
▸
If the error still occurs, contact SICK Service.
No connection to Host.
•
The arrow symbol changes from green to red.
•
Measurements are still possible, but the results are not transmitted
to the HOST interface.
▸
Check connection settings.
▸
If you have any questions, contact the network administrator in
charge.
General System Error
▸
Restart MDA Vision. To do this, switch the device off and on again
at the main switch.
▸
If the error still occurs, contact SICK Service.
Place object centered on scale for
measurement
•
Object not placed in the reading field
▸
See section
7.7.3 Object not placed in the reading field
Place barcode near by the aiming laser.
•
An object was brought into the field of view of the sensors. But the
Lector could not read a bar code
▸
See section
Please free measurement area at start
up.
•
The system was started up with an object on the scale.
▸
See section
7.7.1 No free measuring range after system start
Object too big: <DIMENSIONS>
•
One or more object dimensions exceed the allowed dimensions.
▸
See section
7.7.4 Object too big/too small
Object too small: <DIMENSIONS>
•
One or more object dimensions fall below the permissible
dimensions.
▸
See section
7.7.4 Object too big/too small
Confirm custom fields
•
The custom fields entered were not confirmed.
▸
See section
7.7.5 Custom Fields were not confirmed
No stable weight!
•
No stable object weight could be determined.
▸
See section
Scale underload! Please free Scale and
click on "Zero
•
The scale is in underload.
▸
See section
Object weight too low.
•
The object is too light.
▸
Only measure objects whose weight corresponds to the technical
data.
Scale overload!
•
The object is too heavy.
▸
Only measure objects whose weight corresponds to the technical
data.