![background image](http://html.mh-extra.com/html/sick/8027513/8027513_operating-instructions-manual_1264195032.webp)
4
TRANSPORT, SETUP, AND MOUNTING
32
8027513/V1-0/2022-03|SICK
O P E R A T I N G I N S T R U C T I O N S | MDA Vision
Subject to change without notice
Fig. 28: Leveling the scale frame
Legend
1
Adjustable foot
2
Hexagon nut
3
Leveling bubble
▸
Place the scale frame back on the base plate.
NOTE
When setting it down, make sure that the connecting cables are not
disconnected.
▸
Level the scale. To do this, turn the adjustable feet on the bottom of the device.
NOTE
The scale is equipped with a leveling bubble. If the bubble is inside the circle (Fig
29 left), the scale is levelled; otherwise, if the bubble is not completely inside the circle
(Fig 30 right), then continue maneuvering the feet until desired outcome is achieved
Fig. 31: Display of the leveling bubble
▸
Adjust the feet so that the scale is stable and does not wobble.
▸
After leveling, tighten hexagon nut firmly.
▸
Place the sheet metal cover on the scale frame.
The sheet metal cover is held in position by the rubber grommets on the saucer.
Fig. 32: Putting the sheet metal cover on the scale frame
Leveling scale
Putting on
sheet metal cover