TRANSPORT, SETUP, AND MOUNTING
4
33
8027513/V1-0/2022-03|SICK
Subject to change without notice
O P E R A T I N G I N S T R U C T I O N S | MDA Vision
4.3.3
Mounting and connecting sensor head
All sensor components are mounted in the sensor head in the ordered configuration.
The sensor head must be attached to the support tube and the cables leading out of the
support tube must be connected to the sensor components.
DANGER!
SUSPENDED LOADS
The sensor head weighs up to 9 kg, depending on the number of sensor components
installed at the factory.
There is a risk of injury from suspended loads and damage to the sensor components
during mounting.
▸
Perform mounting with 2 persons.
▸
Lift the sensor head in line with ergonomic principles.
▸
Wear safety shoes in addition to personal protective equipment.
Fig. 33: Support tubes - pre-assembly (at the factory)
Legend
1
Support tube with mounting plate
2
Cables led out of support tube with connection plugs
3
Sensor head with pre-assembled sensor components and mounting plate
4
Bag with screws for mounting
Pre-assembly
(factory)