![background image](http://html.mh-extra.com/html/sick/8027513/8027513_operating-instructions-manual_1264195027.webp)
TRANSPORT, SETUP, AND MOUNTING
4
27
8027513/V1-0/2022-03|SICK
Subject to change without notice
O P E R A T I N G I N S T R U C T I O N S | MDA Vision
▸
Use a manned forklift truck or suitable lifting truck to transport the transport box.
▸
Pick up the transport pallet with the forks.
NOTE
Make sure that the center of gravity is in the center between the forks and that
the forks are completely entrenched under the transport pallet.
▸
Always transport the transport box upright and horizontally.
▸
Carefully set down the pallet at the place of use.
DANGER!
SUSPENDED LOADS
During transport to the place of use, tipping or falling loads pose a risk of severe injury
or damage to property.
▸
Only use lifting equipment which is suitable for the weight and dimensions of the
freight.
▸
Never enter the area under suspended loads.
▸
Pay close attention when lifting loads.
▸
Comply with lifting instructions to prevent injuries and accidents.
▸
Wear personal protective equipment (safety helmet, safety shoes).
▸
Observe all local safety and work safety regulations.
4.2
Unpacking MDA Vision
•
MDA Vision is delivered partially assembled.
•
The individual parts are packaged to protect them from shocks.
NOTE
All work relating to the installation of the device must only be done in consideration
of the relevant safety regulations.
Fig. 21: Disassembling the transport box
▸
Loosen the transportation straps.
▸
Remove the lid.
▸
Remove side panels and discard foam inserts.
The individual assemblies are now accessible from all sides.
Transport with manned
forklift truck/
lifting truck
Disassembling the
transport box