![background image](http://html.mh-extra.com/html/sick/8027513/8027513_operating-instructions-manual_1264195059.webp)
OPERATION
7
59
8027513/V1-0/2022-03|SICK
Subject to change without notice
O P E R A T I N G I N S T R U C T I O N S | MDA Vision
7.3
Using mobile hand-held scanner
As an alternative to automated code reading by the Lector, the mobile hand-held scanner
can also be used to record codes.
This approach is useful, for example, if the object has a very small code or the code is
located on the side or bottom of the object. Even objects without a printed code can be
detected by scanning a separate label.
NOTE
Use of the hand-held device requires that it has been connected and configured
(see section
6.2.4 Code reading configuration
▸
Place the object on the scale.
▸
Remove the mobile hand-held scanner from the bracket.
▸
Press the trigger on the scanner handle to activate the scanner light source.
Fig. 54: Scanning code with mobile hand-held scanner
▸
Aim the laser beam at the code. A beep indicates that the code has been read
successfully.
▸
Put the scanner back into the bracket.
•
The manually entered code is shown with the last visible camera image in the left
image window.
•
As soon as the object is standing freely on the scale, the weight and dimension values
are determined, displayed, and output if there is a network connection.