COMMISSIONING
6
51
8027513/V1-0/2022-03|SICK
Subject to change without notice
O P E R A T I N G I N S T R U C T I O N S | MDA Vision
6.2.6
Image output configuration
The
Output Images
page is used to configure the output of the image files.
▸
Activate output of the camera image. To do this, enable the
RGB image output
switch.
▸
In the
Source
field, specify which device should provide the camera images. As a rule,
this is the
Visionary-S
3D camera.
▸
Activate
Image Cropping
if the camera image is to be cropped to the image section
with the measured object.
NOTE
This is only possible if the entry
IP Cam
was selected in the
Source
field.
▸
Configure MDA Vision for image output as FTP client (for settings see section
Configuration of the data output
).
•
Depending on the application, personal data can be processed with the MDA Vision.
NOTE
In this case, secure communication protocol must be selected.
Output of camera
image
Safe communication