![background image](http://html.mh-extra.com/html/sick/8027513/8027513_operating-instructions-manual_1264195034.webp)
4
TRANSPORT, SETUP, AND MOUNTING
34
8027513/V1-0/2022-03|SICK
O P E R A T I N G I N S T R U C T I O N S | MDA Vision
Subject to change without notice
▸
Remove the suspension screw from the bag and screw it into the back of the sensor
head until it protrudes approx. 5 mm.
▸
Hook the sensor head into the recess of the mounting plate of the support tube using
the suspension screw.
The sensor head is then in the correct mounting position and is secured against tipping
out.
Fig. 34: Hooking sensor head into mounting plate
▸
Remove the two M6 screws from the bag and use them to screw the sensor head to
the mounting plate.
▸
Hand-tighten the suspension screw and the fixing screws.
Fig. 35: Screwing down sensor head
Hooking sensor box
into mounting plate
Screwing down
sensor head