![background image](http://html.mh-extra.com/html/sick/8027513/8027513_operating-instructions-manual_1264195090.webp)
9
MAINTENANCE AND REPAIR
90
8027513/V1-0/2022-03|SICK
O P E R A T I N G I N S T R U C T I O N S | MDA Vision
Subject to change without notice
▸
Insert the clamping blocks into the replacement device and fix them with the clamping
screws.
▸
Screw the replacement device back onto the mounting plate.
▸
Screw the connecting cables back on (see section
9.3.2
Replacing the Lector6xx
Fig. 68: Replacing Lector6xx
▸
Switch off the device using the main switch of the MDA Vision.
▸
Unscrew all connecting cables from the defective device.
▸
Loosen and remove the four fixing screws on the mounting plate.
NOTE!
When loosening the last screw, press the Lector against the mounting plate with
one hand to fix the device.
▸
Remove the defective Lector from the bracket. The mounting plate remains mounted
on the frame of the sensor box.
Fig. 69: Removing the memory card from a defective Lector6xx
▸
Loosen both hexagon socket screws of the cover using the SW 2 hex key.
▸
Push the cover away from the device until the card slot can be accessed.
▸
Pull the memory card out of the card slot.
Mounting
Removal
Removing the microSD
card