background image

Using the Kill A Watt

  Meter 

 The LCD shows all meter readings: voltage (Volt), 
current (Amp), watts (Watt), kilowatt-hours (KWH), 
frequency (Hz), power factor (PF), and volt amps 
(VA).  

Getting Started 

Plug the meter into the wall and plug the appliance into the meter. 
 
Once the meter is plugged in, it will start to accumulate KWH and 
record the powered duration time (hour).  The pink button is a   
toggle function key. When pressed, it will alternate between KWH 
used since being plugged in and the number of Hours the meter has 
been plugged in.  

Step 3 - Calculate the Results 

Step 2 - Capture the Data 

Step 1 - Plug it In 

Before unplugging, record the KWH and Hours from the meter. The 
meter resets to zero when unplugged, so it is  important to record 
before unplugging.  Display the KWH and Hours of duration by  
using the pink KWH/Hours button. 
 
The time (duration) will initially be displayed as Hours:Minutes 
(example: 02:30 for 2 hours and 30 minutes). 

 

Identify the kilowatt-hours (KWH) used for a single hour.  
 

Example: The meter was plugged in for 02:00 hours and used .20 KWH in that time. To    

 

determine the use for a single hour, divide .20 by 2 hours.  .20   2 = .10 

 
Identify your power rate by looking on your power bill.  
 
Multiply the KWH used in 1 hour by the Cost per hour of use to get the Cost Per Hour. 
 

Example: .10 x 8

¢

 = .008 

 
Multiply the Cost Per Hour by the number of hours the appliance is used per month to get the esti-
mated cost per month. 
 

Example: .008 x 720 hours = $5.76  

 
The appliance used in the example would use approximately $69.12 per year in electrical costs. 

Reviews: