- 107 -
8.1.8 Ending Program (Pattern End Function)
If Pattern end output is selected in [Event output EV
allocation], Pattern end output is turned ON
after program control is finished, and the SV/MV/TIME Display flashes
.
By pressing the
key for approximately 1 second, Pattern end output is turned OFF, and the unit
returns to Program control Stop (in Standby).
If Pattern end output time is set, Pattern end output is automatically turned OFF after Pattern end
output time has expired. And the unit returns to Program control Stop (in Standby).
[Step SV Hold function when program ends]
If ‘Holding’ is selected in [Step SV Hold function when program ends], the PTN Display flashes when
program control ends, and control performs using the step SV of the last step.
By pressing the
key for approximately 1 second, this function will be cancelled, and the unit
returns to Program control Stop (in Standby).
If ‘Holding’ is selected in [Step SV Hold function when program ends] when program control ends,
the PTN Display flashes, and control is performed using the step SV of the last step.
If ‘Not Holding’ is selected in [Step SV Hold function when program ends] while Step SV Hold function
is working, the program will be forced to stop.
If Pattern end output is selected in [Event output EV
allocation], Pattern end output is turned ON
after program control is finished, and the SV/MV/TIME Display flashes
.
