- 151 -
12.6 Wait Block Setting Group
Upper left: PTN Display, PV Display
The PTN Display is unlit, and the PV Display indicates setting item characters.
Lower left: STEP Display, SV/MV/TIME Display
The STEP Display is unlit, and the SV/MV/TIME Display indicates factory default value.
Right side: Indicates the setting item and setting range.
Character,
Factory Default
Setting Item, Setting Range
Data
Block 0 Wait value
Thermocouple, RTD input without decimal point: 0 to 100
( )
Thermocouple, RTD input with decimal point: 0.0 to 100.0
( )
DC voltage, current input: 0 to 1000
(
The placement of the decimal
point follows the selection.
)
Block 1 Wait value
Thermocouple, RTD input without decimal point: 0 to 100
( )
Thermocouple, RTD input with decimal point: 0.0 to 100.0
( )
DC voltage, current input: 0 to 1000
(
The placement of the decimal
point follows the selection.
)
Repeat the above settings up to ‘Block 9 Wait value’,
in the same way if necessary.
Block 9 Wait value
Thermocouple, RTD input without decimal point: 0 to 100
( )
Thermocouple, RTD input with decimal point: 0.0 to 100.0
( )
DC voltage, current input: 0 to 1000
(
The placement of the decimal
point follows the selection.
)
