- 51 -
②
If ON time is the same value as the step time, the Time signal output will turn OFF for
a brief moment while Step numbers change.
Therefore, set the Time signal output ON time longer than the step time so that Time signal
output may turn ON even when steps changes.
③
When ON time is not the same value as the step time, from the point where steps move to
the next step, the Time signal output operates following the Time signal output OFF or ON
time of the next step, regardless of the Time signal output settings of the previous step.
Setting items in the Time signal block setting group are shown below.
Available when Time signal output (TS option) is ordered.
Character,
Factory Default
Setting Item, Function, Setting Range
Block 0 Time signal output OFF time
• Sets Block 0 Time signal output OFF time.
• Setting range:
00:00 to 99:59
Time unit follows the selection in [Step time unit].
Block 0 Time signal output ON time
• Sets Block 0 Time signal output ON time.
• Setting range:
00:00 to 99:59
Time unit follows the selection in [Step time unit].
Block 1 Time signal output OFF time
• Sets Block 1 Time signal output OFF time.
• Setting range:
00:00 to 99:59
Time unit follows the selection in [Step time unit].
Repeat the above settings up to ‘Block 15 Time signal output ON time’,
in the same way if necessary.
Block 15 Time signal output ON time
• Sets Block 15 Time signal output ON time.
• Setting range:
00:00 to 99:59
Time unit follows the selection in [Step time unit].
At this stage, settings of Time signal block setting group are complete.
If the
and
keys are pressed at the same time, the unit returns to the Block setting group.
By pressing the
key, the unit returns to RUN mode.
