Shinko Denshi LF124R, Operation Manual

Page: 116 / 154

6 Input/Output to/from External Devices LF(R) Series Operation Manual
- 106 -
C1 C2 Code (C1) Code (C2) Description Response
O 5 4FH 35H
Output once when the
balance is stable. Stop
output when unstable.
Output once when the
balance has restabilized
(the output includes zero)
even if it is not reloaded.
O 6 4FH 36H
Output once when the
balance is stable. Output
continuously when
unstable. Output is
stopped after a single
output when the balance
is stable even if it is not
reloaded.
O 7 4FH 37H
Output once when the
[Print] key is pressed if
the balance is stable.
O 8 4FH 38H Output once immediately.
O 9 4FH 39H
Output once after
stabilizing.
O A 4FH 41H
Interval function (Output
once each time the output
time has elapsed)
O B 4FH 42H
Interval function (Output
once during stabilization,
each time the output time
has elapsed)
A00:Successful
completion
E01:Command
error
Commands O0 to O7 have the same functions as the output control set by the function
setting.
Commands O8 and O9 are used to request data from the balance.
Once the O0 to O7 commands are executed, that state is maintained. However, the
status is reset to the function setting when the balance is turned on again.
When the OA or OB command is input, the interval function starts, and when input again,
the interval function ends.
After the O8 or O9 command is executed, it returns to “O0.”
(3) Measurement mode setting command
C1 C2 Code (C1) Code (C2) Description Response
M 1 4DH 31H Set to Mode 1
M 2 4DH 32H Set to Mode 2
M 3 4DH 33H Set to Mode 3
M 4 4DH 34H Set to Mode 4
A00: Successful
completion
E01: Command error
E02: Error
* The measurement mode activated by mode settings 1 to 4 depends on the weighing
mode currently in use.