Shinko Denshi LF124R, Operation Manual

Page: 6 / 154

- v -
How to Read This Manual
This manual comprises the following chapters:
Notational Conventions
In this manual, the following notation is used.
The balance
Refers to an LF series product.
[On/Off] key
The names of the operation keys provided on the front of the main
unit are enclosed in brackets [ ].
“Func”
Messages shown on the display are enclosed in quotation marks “ ”.
Press the key.
Refers to pressing a key once.
Press and hold the
key.
Refers to pressing and holding down the operation key until the
desired display is obtained.
Chapter 1
How to Begin This chapter gives introductory information such as how
to assemble and install the balance, and how to turn the
power on and off. Be sure to read this chapter the first
time you use the balance.
Chapter 2
Basic Operation This chapter gives basic instructions on how to weigh
objects.
The procedures for setting the functions used to set
various functions are also described.
Chapter 3
Various Measuring Methods This chapter describes how to use various measuring
methods of the balance, such as counting and
percentage weighing.
Chapter 4
Adjusting the Balance
The balance needs to be adjusted depending on where
and when it is used.
This chapter describes how to calibrate and test the
balance.
Chapter 5
Setting the Functions This chapter describes how to set the functions of the
balance, such as setting units and readability.
Chapter 6
Input/Output to/from External
Devices This chapter describes printing to printers and how to
input and output to and from RS-232C devices in detail.
Chapter 7
Troubleshooting This chapter describes how to troubleshoot problems
occurring with the balance, including actions required for
errors, and remedies to problems.
Appendixes The appendixes contain required data including the
specifications of the balance.