Shinko Denshi LF124R, Operation Manual

Page: 54 / 154

3 Various Measuring Methods LF(R) Series Operation Manual
- 44 -
3-7-1 Limit function settings
First set the limit function and then set limit values.
1
Go to the function setting mode.
(Refer to Section 2-6 “Basics of Function
Settings.”)
Press and hold the [Function] key until “Func” is
displayed.
2
Select the limit function. Press the [Function] key several times to select “2.SEL.”
Press the [Zero/Tare] key to select “2.SEL 2.”
When using both the cumulate and limit functions
together, select “2.SEt. 3.”
3
Set the judgment condition. Press the [Function] key several times to select “21.Co.”
Press the [Zero/Tare] key to select a judgment condition.
1: Always judge (even when the balance is
unstable)
2: Judge only when the balance is stable.
4
Set the range to cover. Press the [Function] key several times to select “22.Li.”
Press the [Zero/Tare] key to select the range to cover.
0: Detect when the limit is exceeded by more
than five divisions.
1: Detect when the limit is exceeded by more
than fifty divisions
2: Detect both when the limit is exceeded and
when it is not reached.
5
Set the point scale. Press the [Function] key several times to select “23.Pi.”
Press the [Zero/Tare] key to select a point scale.
0: 1-point scale (OK and LO are judged.)
1: 1-point scale (HI and OK are judged.)
2: 2-point scale (HI, OK, and LO are judged.)
3: 3-point scale (Ranks 1 to 4 are judged.)
4: 4-point scale (Ranks 1 to 5 are judged.)
6
Set the judgment method. Press the [Function] key several times to select “24.tYP.”
Press the [Zero/Tare] key to select a judgment method.
1: Judge using definite values
2: Judge using deviation values