Shinko Denshi LF124R, Operation Manual

Page: 115 / 154

LF(R) Series Operation Manual 6 Input/Output to/from External Devices
- 105 -
6-5-3 Command format
An input command consists of 4 characters including terminators (CR/LF).
C1 C2 CR LF
6-5-4 Format of each command
Pay attention to the difference between O (the letter “o”) and 0 (zero).
(1) Tare range setting (zero-point adjustment) command
C1 C2 Code (C1) Code (C2) Description Value Acknowledgment
T (SP) 54H 20H
Tare
range
setting
Zero-point
adjustment
None
A00:Successful
completion
E01:Command
error
E04:The tare range
cannot be set (zero
point cannot be
adjusted)
(range violation,
weight error, etc.).
(2) Output control setting command
C1 C2 Code (C1) Code (C2) Description Response
O 0 4FH 30H Stop output.
O 1 4FH 31H
Output continuously at all
times.
O 2 4FH 32H
Output continuously if
stable (Stop output if
unstable).
O 3 4FH 33H
Output once when the
[Print] key is pressed
(whether the balance is
stable or unstable).
O 4 4FH 34H
Output once when the
balance is stable. Output
when a sample is
removed, causing the
display to go below zero,
and then another sample
is placed, stabilizing the
balance.
A00:Successful
completion
E01:Command
error