Shinko Denshi LF124R, Operation Manual

Page: 99 / 154

LF(R) Series Operation Manual 6 Input/Output to/from External Devices
- 89 -
6 Input/Output to/from External
Devices
6-1 Output to Printers
By connecting a printer to the balance, span adjustment results, span test results, and
measurement results can be printed in an ISO/GLP/GMP compliant format.
6-1-1 Connecting a printer
Connect the RS-232C connector of the balance to a printer using the D-SUB9P cable.
You can connect the balance to SHINKO DENSHI CSP-160 II printer or standard printer from
printer manufacturers.
The following setting is required for the printer. Set it by referring to the operation manual of
the printer.
Set the printing function (printing control) to “balance control.”
Match the baud rate and other communication settings to the settings of the balance.
Set the date and time of the printer before printing.
6-1-2 Printing span adjustment and span test results
1
Go to the function setting mode.
(Refer to Section 2-6 “Basics of Function
Settings.”)
Press and hold the [Function] key until “Func” is
displayed.
2
Press the [Function] key several times to select “G.GLP.”
Select “1” by pressing the [Zero/Tare] key.
3
Press the [Function] key several times to select “G1.out.”
Select “1” by pressing the [Zero/Tare] key.
4
Save the setting. Press the [Set] key.
The balance returns to the weight display.