Shinko Denshi LF124R, Operation Manual

Page: 73 / 154

LF(R) Series Operation Manual 4 Adjusting the Scale
- 63 -
4-4 Se-CAL (full automatic calibration
function)
Se-CAL function is composed of two functions. One is Advice CAL, which advises the user to
perform calibration by showing blinking “CAL” in the display. “CAL” start blinking when a
certain amount of time elapses since the previous calibration or when the temperature
changes. Another is full automatic calibration function, which automatically perform
calibration after 10 minutes have passed since “CAL” start blinking.
The full automatic calibration function is only available for the LFR type.
1
Go to the function setting mode.
(Refer to Section 2-6 “Basics of Function
Settings.”)
Press and hold the [Function] key until “Func” is
displayed.
2
Select full automatic calibration.
or
Press the [Function] key several times to select “E.Ad.C.”
Press the [Zero/Tare] key to select “1” or “2.”
“E.Ad.C.0”: Both functions are inactive.
“E.Ad.C.1”: Advice CAL function is active.
“E.Ad.C.2”: Full automatic calibration function is
active.
3
Return to the weight display. Press the [Set] key.
The balance returns to the weight display.
The full automatic calibration function is performed only when “8.CA.1” (span adjustment
with internal weight) is selected.