Shinko Denshi LF124R, Operation Manual

Page: 61 / 154

LF(R) Series Operation Manual 3 Various Measuring Methods
- 51 -
Zero-point setting and tare range setting are important for accurate calculation
of statistical values.
To delete data, when incorrect data is mistakenly collected for example, refer to
Section 3-8-4 “Cancellation of last collected data.”
Zero or minus data cannot be collected and “9-Err” will be displayed.
Statistical operation uses digits not shown in the weight display. Statistical
operation results may differ from results of operation using readout values only.
In step 4, pressing the [Print] key is required only when “71.o.c.7” is selected.
When “71.o.c.4” is selected, data is output and collected automatically when the
balance is stable. For the statistical operation function, the “71.o.c.” setting is valid
when it is set to “4” or “7.” If it is set to other values, it is taken as “71.o.c.7.”
When the number of data items exceeds 999 or the total exceeds the number of
digits that can be displayed on the balance during data collecting, “9-Err” is
displayed and the balance no longer performs operations. Clear the statistical
operation result.
Tip for operation
Keys to operate for the statistical operation function are outlined below. Press the [Set] key to
proceed to the next calculation item.