Shinko Denshi LF124R, Operation Manual

Page: 31 / 154

LF(R) Series Operation Manual 2 Basic Operation
- 21 -
2-6 Basics of Function Settings
Use the Function key to change the balance’s settings.
This section describes the basic operations for setting functions.
1
Go to the function setting mode.
Release the key when the display changes.
Press and hold the [Function] key. After “Func” is
displayed, release the key.
The first function item is then displayed.
If you continuously hold the [Function] key, the
function setting mode will change to another
mode. If this happens, press the [Print] key to
cancel the setting and do this step over again.
2
Select an item to set. Press the [Function] key to select the item to be set.
Example: Press the [Function] key once and
select “2.SEL” (additional functions). The first
setting “2.SEL 0” is displayed.
3
Select a setting. Press the [Zero/Tare] key to select the setting.
The next setting is displayed every time the
[Zero/Tare] key is pressed. The first setting is
displayed again if the [Zero/Tare] key is pressed
when the last setting is displayed.
Example: Press the [Zero/Tare] key twice to select
“2.SEL 2.”
4
Save the setting. Press the [Set] key to finish making settings.
The balance returns to the weight display.
To cancel making settings, press the [Print] key.
Refer to Appendix 1 “Function Setting List” for available function items and
settings.
To return the function settings to their default values, refer to Section 7-3
“Initializing.”
When you are in the middle of making a function setting, you can press the [Print] key to
cancel the setting and return to measurement mode.