Shinko Denshi LF124R, Operation Manual

Page: 77 / 154

LF(R) Series Operation Manual 4 Adjusting the Scale
- 67 -
4-6 Easy RES Function (single-touch
response time change)
Easy RES function enables the user to change the response speed very easily. You can
change response speed just by pressing [Set] key.
By changing the response speed according to the degree of vibration in the place where the
balance is installed, you can reduce the display fluctuation and the time spent waiting for the
display to stabilize.
1
Go to the function setting mode.
(Refer to Section 2-6 “Basics of Function
Settings.”)
Press and hold the [Function] key until “Func” is
displayed.
2
Set the single-touch response speed. Press the [Function] key several times to select “d.o.t.c.”
Press the [Zero/Tare] key to select “1.”
3
Save the setting. Press the [Set] key.
The balance returns to the weight display.
When the [Set] key is pressed once, the current setting is displayed.
Each time the [Set] key is pressed, the response speed changes in three steps: “NORMAL,”
“SLOW,” and “FAST” in this order. After the setting is completed, the balance returns to
measurement mode automatically.
This function is related to Function 1 “5A.rE.” and “5C.Fr.” settings.
Related Function 1 setting
[Set] key Meaning Description
“5A.rE.” “5C.Fr.”
FAST
Fast response
Easily affected by
vibration
0 1
NORMAL
Halfway between FAST
and SLOW
2 2
SLOW
Slow response
Hardly affected by
vibration
4 4