Shinko Denshi LF124R, Operation Manual

Page: 92 / 154

5 Function Setting LF(R) Series Operation Manual
- 82 -
Method 2) Change the stability indicator lighting criteria to prevent the stability
indicator from blinking.
This method does not affect the flickering of displayed values, but affects when the stability
indicator lights up.
Setting larger values reduces blinking and causes the stability indicator to light up faster.
Set larger values for “4A.S.h (stability judgment width)” and “4b.S.C. (number of stability
judgments)” in this order.
Setting smaller values reduces blinking and causes the stability indicator to take longer to
light up.
Set smaller values at “4b.S.C. (number of stability judgments)” and “4A.S.h (stability
judgment width)” in this order.
Method 3) Set the minimum readability to a larger value to improve both flicker of
displayed values and blinking of the stability indicator. (This method cannot be used
for the LF225DR.)
Set a larger value for “b2.d.A/b4.d.b (minimum readability setting).”
1
Go to the function setting mode.
(Refer to Section 2-6 “Basics of Function
Settings.”)
Press and hold the [Function] key until “Func” is
displayed.
2
Set each function. Press the [Function] key several times to select the
function to set. (See the above table).
4A.S.h.= Stability judgment width
4b.S.C.= Number of stability judgments
5A.rE.= Response speed
5C.Fr. = Signal processing
b2.d.A= Readability setting (A)
b4.d.b= Readability setting (B)
3
Select a setting. Press the [Zero/Tare] key to select a set value for each
function (see the above table).
4
Save the setting. Press the [Set] key.
The balance returns to the weight display.