3-2 System Preparation
2. Push the retaining clamp downward, and lock the power cord, as shown in the figure
below.
3. Plug the other end power plug into an appropriate power socket. The grounding terminal
should be connected with a power grounding cable to ensure that protective grounding
works normally.
NOTE:
Make sure to allow sufficient slack in the cable so that the plug will not be pulled out
from the socket even if the system is moved slightly. If the plug is pulled out
accidentally, data may be lost.
WARNING:
1.
DO NOT connect the three-wire cable of the system with a
two-wire plug without protective grounding; otherwise,
electric shock may result.
Protective grounding
Retaining clamp
Power plug
Receptacle
