System Maintenance 16-1
16
System Maintenance
Routine system maintenance shall be carried out by the user. System maintenance after the
warranty has expired is the full responsibility of the owner/operator.
The responsibility for maintenance and management of the product after delivery resides with
the customer who has purchased the product.
If you have any questions, please contact Mindray Customer Service Department or sales
representative.
WARNING:
1. Only an authorized Mindray service engineer can perform
maintenance not specified in this operator’s manual.
2. For the sake of the system performance and safety, you
should perform periodical checks for the system.
16.1 Daily
Maintenance
You are responsible for daily maintenance.
16.1.1 Cleaning the System
WARNING:
1. Before cleaning the system, be sure to turn off the power and
disconnect the power cord from the outlet. If you clean the
system while the power is “On”, it may result in electric
shock.
2. DO NOT directly spray solution onto the monitor, system
control panel or hard surfaces that is under pressure or
pumped. Ingress fluid leakage into the monitor or system can
damage the monitor or system, causing possible electric
shock or system failure.
CAUTION:
Do not spill water or other liquid into the system while you perform
the cleaning. Otherwise it may result in malfunction or electric shock.
NOTE:
1. DO NOT use hydrocarbon glass cleaner or cleaner for OA (Office Automation)
equipment to clean the monitor. These substances may cause deterioration of
the monitor.
2. Please clean the control panel periodically, otherwise the button may be
blocked by dirt and the system will be buzzing while the button makes no
response.
Cleaning the transducer
z
Tools: mild soapy water , dry soft cloth , soft brush
z
Method:
a) Wipe out the dust attached to surface of transducer, and check if it has any
abnormality such as crack;
