Comments and Body Marks 8-5
NOTE:
1.
When no object is selected, pressing the <Clear> key will clear all comments
and all measurements calipers.
2.
After powering off, the system will clear all comments on the image.
8.2 Body
Mark
The Body Mark (Pictogram) feature is used for indicating the exam position of the patient and
transducer position and orientation.
The system supports body marks for Abdomen, Cardiology, GYN, OB, Urology, Small Part
and Vascular applications. You can customize the body mark.
8.2.1
Body Mark Operation Procedures
To add the first body mark:
1. Press <Body Mark> to enter the body mark status.
2. Use the Multifunctional Knob to navigate the body mark items.
3. Select the body mark, adjust the position and direction of the probe icon.
4. Exit body mark mode:
z
Press the <Set> key to confirm the position and orientation of the probe marker and
exit the body mark mode.
z
Press [Body Mark] again on the control panel.
z
Press the [Esc] key to confirm the current operation and exit the body mark status.
8.2.2 Menu
In the body mark menu. You can:
Custom
Click [Custom] to load the body mark pictures.
You can import a user-defined body mark of PNG and BMP (24/ 32/ 256 bit) image of
75*75 pixels.
8.2.3 Adding
Body
Marks
To add the first body mark:
(1) Enter body mark mode:
(2) Select the body mark library through the menu title.
(3) Select the body mark.
Move the cursor onto the desired body mark to highlight your choice, and press
<Set> to add the selected body mark; or rotate the Multifunctional Knob to view the
bodymarks.
(4) Press <Set> or use the Multifunctional Knob to confirm the selection.
(5) To adjust the probe position and orientation marker:
z
Roll the trackball to place the probe marker at the correct position.
z
Rotate the Multifunctional Knob to adjust the orientation.
z
Press the <Set> key or the Multifunctional Knob to confirm the position and
orientation of the probe marker and exit the body mark mode.
8.2.4
Moving Body Marks
You can move the body mark graphic to any desired position within the image area.
1. Roll the trackball to move the cursor onto the body mark. The cursor changes into
,
indicating you can move the pictogram to a new position.
2. Press <Set> key to select the body mark, and a frame will appear around the graphics.
