Sharp MX-M283, Operation Manual

Page: 683 / 884

7-35
SYSTEM SETTINGS
Contents
Printer Settings
Image Send Settings
Item Factory default setting Page
■
Printer Settings
7-73
●
Default Settings 7-73
X
Prohibit Notice Page Printing Enabled 7-73
X
Prohibit Test Page Printing Disabled 7-73
X
A4/Letter Size Auto Change Disabled 7-73
X
Print Density Level 3 7-73
X
Bypass Tray Settings 7-73
‹
Enable Detected Paper Size in Bypass Tray Disabled 7-73
‹
Enable Selected Paper Type in Bypass Tray Enabled 7-73
‹
Exclude Bypass-Tray from Auto Paper Select Disabled 7-73
X
Job Spool Queuing Enabled 7-73
X
Disabling of USB Memory Direct Print Disabled 7-73
X
Disabling of Network Folder Direct Print Disabled 7-73
●
Interface Settings 7-74
X
Hexadecimal Dump Mode Disabled 7-74
X
I/O Timeout 60 sec. 7-74
X
Enable USB Port Enabled 7-74
X
USB Port Emulation Switching Auto 7-74
X
Enable Network Port Enabled 7-74
X
Network Port Emulation Switching Auto 7-74
X
Port Switching Method Switch at End of Job 7-74
Item Factory default setting Page
■
Image Send Settings
7-75
●
Operation Settings 7-75
X
Other Settings 7-75
‹
Default Display Settings Scan (fax when fax is installed)
7-75
• Hold settings for a while after scanning has been
completed
Disabled
‹
Address Book Default Selection Tab Switch: ABC, Address Type: All 7-75