Sharp MX-M283 Operation Manual Download Page 48

Page: 48 / 884

1-7

BEFORE USING THE MACHINE

Contents

SIDE AND BACK

(1)

USB connector (A type)

Supports USB 2.0 (Hi-Speed).
This is used to connect a USB device such as USB
memory to the machine.

(2)

LAN connector

Connect the LAN cable to this connector when the
machine is used on a network.
For the LAN cable, use a shielded type cable.

(3)

USB connector (B type )

Supports USB 2.0 (Hi-Speed).
A computer can be connected to this connector to use
the machine as a printer.
For the USB cable, use a shielded cable.

(4)

Service-only connector

(5)

Power plug

(6)

Extension phone socket

When the fax function of the machine is used, an
extension phone can be connected to this socket.

(7)

Telephone line socket

When the fax function of the machine is used, the
telephone line is connected to this socket.

When the fax expansion kit is installed

(1)

(2)

(3)

(4)

(5)

Caution

This connector is for use only by service technicians.
Connecting a cable to this connector may cause the
machine to malfunction.

Important note for service technicians:
The cable connected to the service connector must be
less than 118" (3 m) in length.

(6)

(7)

Summary of Contents for MX-M283





















































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for MX-M283

Reviews:

Related manuals for MX-M283

Brands by name

Popular brands

Sharp MX-M283, Operation Manual

Search results

Summary of Contents for MX-M283

Reviews:

Related manuals for MX-M283

Brands by name

Popular brands