manualshive.com logo in svg

Sharp MX-C301W, Operation Manual, Page: 713 / 748

Share
Download
Sharp MX-C301W Operation Manual Download Page 713

8-8

TROUBLESHOOTING

Contents

INDICATORS AND DISPLAY MESSAGES

If one of the following messages appears in the display, take prompt action as instructed by the message.

< >: Tray number

Message

Action

Maintenance required.

It is time for regular maintenance. Contact your SHARP Service Department.

Call for service.      –

Turn off the power and then turn it back on. If this does not clear the message, 
write down the 2-digit main code and 2-digit sub-code ("     -     "), turn off the 
power, and promptly contact your SHARP Service Department.

Toner supply is low.
Change the toner cartridge.

The toner cartridge must be replaced soon.

Check the toner cartridge.

Check to see if the toner cartridge has been installed properly.

Take out toner cartridge and shake it. 
Reinstall it and close the front cover. 

Remove the toner cartridge as explained in "

REPLACING THE TONER 

CARTRIDGES

" (page 1-49), shake it, and then reinstall.

Please replace the toner collection 
container.

Replace the toner collection container as explained in "

REPLACING THE TONER 

COLLECTION CONTAINER

" (page 1-52).

Change the toner cartridge.

Replace the toner cartridge as explained in "

REPLACING THE TONER 

CARTRIDGES

" (page 1-49).

Remove paper from the center tray.

The number of sheets in the output tray has reached the limit. Remove the paper.

Please check the paper size of tray < >.

The paper size specified for the tray is different from the actual size. (page 7-13)

Summary of Contents for MX-C301W













































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments