Sharp MX-C301W, Operation Manual

Page: 109 / 748

2-13
COPIER
Contents
MAKING A COPY USING THE DOCUMENT GLASS
To make a copy of a book or other thick original that cannot be scanned with the automatic document feeder, open the
automatic document feeder and place the original on the document glass. This section explains how to make a copy
(1-sided copy of a 1-sided original) using the document glass.
1
Open the automatic document feeder,
place the original face down on the
document glass, and then gently close
the automatic document feeder.
• Align the corner of the original with the tip of the arrow mark
on the document glass scale.
• Place the original in the appropriate position for its size as
shown above.
• After placing the original, be sure to close the automatic
document feeder. If left open, parts outside of the original will
be copied black, causing excessive use of toner.
2
Check the paper to be used and the
color mode.
Make sure that the desired paper (tray) and color mode are
selected.
• To change the original size, touch the [Original] key.
☞
ORIGINALS (page 2-9)
• To change the paper (tray), touch the [Paper Select] key.
☞
PAPER TRAYS (page 2-10)
• To change the color mode, touch the [Color Mode] key.
☞
COPY COLOR MODES (page 2-20)
B5
5-1/2" x 8 -1/2" (A5)
8 -1/2" x 11" (A4)
mark
Document glass scale
Auto
8 ½ x11
Plain
8 ½ x11
Color Mo d e Special Mo d es
2 - Si d e d Copy
Output
File
Quic k File
Copy R atio
100 %
Original Paper Select
Full Color
Exposure
Auto
Pre v ie w
Plain
8
½ x11
8 ½ x11
8 ½ x11