Sharp MX-C301W Operation Manual Download Page 363

Page: 363 / 748

4-78

FACSIMILE

Contents

Press the [BLACK & WHITE START] key to scan the first set.

To cancel scanning...

Press the [STOP] key (

Insert the next set of originals and press the [BLACK & WHITE START] key.

Repeat this step until all originals have been scanned.

To cancel scanning...

Press the [STOP] key (

). All scanned data will be cleared.

Touch the [Read-End] key.

• If no action is taken for one minute after the confirmation screen appears, scanning automatically ends and the

transmission is reserved.

• The [Configure] key can be touched to change the exposure, resolution, scan size, and send size for each original

page scanned.

• If the memory becomes full during scanning, a message will appear and the transmission will be canceled.

• This function cannot be used in direct transmission mode or when the speaker is used to dial.

To cancel Job Build....

Touch the [Job Build] key in the screen of step 3 so that it is not highlighted.

Place

original.

Press

[

Start

]

inis

press

(

Pg.No.x

)

Con

igure

Summary of Contents for MX-C301W













































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for MX-C301W

Reviews:

Related manuals for MX-C301W

Brands by name

Popular brands

Sharp MX-C301W, Operation Manual

Search results

Summary of Contents for MX-C301W

Reviews:

Related manuals for MX-C301W

Brands by name

Popular brands