background image

7-178

SYSTEM SETTINGS

SETTING MODE FOR FAX

Auto Receive Reduce Setting

When a fax is received that includes printed information such as the sender's name and address, the received image is 
slightly larger than the standard size. This setting is used to automatically reduce the image to fit the standard size.

Print Style Setting

This setting determines the paper selection condition when printing received faxes. Select one of the two conditions 
below. 

Print Actual Size Cut off Enabled

Each received image is printed at full size. If necessary, the image is divided onto multiple sheets of paper. 

Auto Size Select

Each received image is printed at full size when possible. When not possible, the image is automatically reduced before 
printing. 

Set the Telephone Number for Data Forwarding

When a problem prevents the machine from printing a received fax, the received fax can be forwarded to another fax 
machine. This setting is used to program the fax number of the destination fax machine. Only one forwarding fax 
number can be programmed (maximum of 64 digits).
To insert a pause between digits of the number, tap the [-] key.
If you wish to specify an F-code confidential memory box in the destination machine, tap the [/] key after entering the fax 
number and enter the F-code (sub-address and passcode). 

Receiving Date & Time Print

Enable this setting to have the date and time of reception printed.
Select [Inside the Received Image] or [Outside the Received Image] for the position where the date and time is printed.
When [Inside the Received Image] is selected, the date and time of reception is printed on the received image.
When [Outside the Received Image] is selected, the received image is reduced and the date and time of reception is 
printed in the blank area that results. 

Fax Output Settings

These settings are used to select the number of copies and output tray for received faxes.

Number of Prints

Set the number of copies of received faxes that are printed to any number from 1 to 99.

• If Auto Receive Reduce is disabled, the edges of the image outside the standard size will be cut off. However, the image 

will be clearer because it will be printed at the same size as the original.

• Standard sizes are sizes such as 8-1/2" x 11" and 8-1/2" x 5-1/2" (A4 and B5).

The [Outside the Received Image] cannot be selected for the reception date and time print setting if "

Auto Receive Reduce 

Setting (page 7-178)

" is not enabled.

This setting can only be used when the [Multiple Set Print] and [Staple] checkboxes are selected 

.

The maximum number of sheets that can be stapled is 30.

Summary of Contents for MX-B355W





































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews: