Sharp MX 3501N - Color Laser - Copier, Service Manual

Page: 225 / 448

MX3500N SIMULATION 7 – 117
<Expression of (Large size) and (Small size)>
(Small size): The paper length in the transport direction is LT
(216mm) or less.
(Large size): The paper length in the transport direction is longer
than LT (216mm).
* Document size judgment of DSPF for items B and D: Small size
for 148mm (A5) or less
* The adjustment unit is the distance of the 0.1 mm unit.
* The smaller the set value is, the smaller the deflection amount of
each specified item is. The greater the set value is, the greater
the deflection amount is.
<Adjustment value>
When the adjustment value is increased, the deflection quantity is
increased. When the adjustment value is decreased, the deflection
quantity is decreased. (When the adjustment value is changed by
1, the stop timing is changed by 1.0 msec.)
53
53-6
Purpose Adjustment
Function (Purpose) Used to adjust the RSPF/DSPF document
tray size of the main unit.
Section RSPF/DSPF
Item Operation
Operation/Procedure
1) Set the tray document guide to the max. width position, and
press [EXECUTE] key. The button is highlighted and the tray
size volume maximum value adjustment is started.
* During the adjustment, "EXECUTING..." is displayed.
* After completion of the tray size volume maximum value
adjustment, the set value is saved to EEPROM and RAM
and the display is shifted to the tray volume A4R size adjust-
ment value start screen. (Each set value is saved to
EEPROM and RAM at each setting.)
2) Set the tray document guide to A4R (11 x 8.5R) width position
and press [EXECUTE] button. The pressed button is high-
lighted and the tray A4R size adjustment is started.
3) Adjust the tray volume A5R size and the tray size volume min-
imum value according to the above procedures.
4) After completion of the adjustment, "COMPLETE"is displayed.
If the adjustment is not completed normally for any rea-
son,"ERROR"is displayed. In that case, the adjustment must
be executed again.
A ENGIN TRAY1(S) Main unit cassette 1 (upper stage), deflection
adjustment value (small size) LT size or less 1 to 99 30
B TRAY1(L) Main unit cassette 1 (upper stage), deflection
adjustment value (large size) Longer size than the above 1 to 99 30
C TRAY2(S) Main unit cassette (lower stage), deflection adjustment
value (small size) LT size or less 1 to 99 30
D TRAY2(L) Main unit cassette (lower stage), deflection adjustment
value (large size) Longer size than the above 1 to 99 30
E MANUAL PLAIN PAPER (S) Manual tray, deflection adjustment value (plain paper,
small size) LT size or less 1 to 99 30
F MANUAL PLAIN PAPER (L) Manual tray, deflection adjustment value (plain paper,
large size) Longer size than the above 1 to 99 30
G MANUAL HEAVY PAPER (S) Manual feed tray, deflection adjustment value (Heavy
paper, small size) LT size or less 1 to 99 45
H MANUAL HEAVY PAPER (L) Manual feed tray, deflection adjustment value (Heavy
paper, large size) Longer size than the above 1 to 99 45
I MANUAL OHP Manual feed tray, deflection adjustment value (OHP) – 1 to 99 45
J MANUAL ENV Manual feed tray, deflection adjustment value
(Envelope) – 1 to 99 45
K ADU PLAIN PAPER (S) ADU, deflection adjustment value (Plain paper, small
size) LT size or less 1 to 99 30
L ADU PLAIN PAPER (L) ADU, deflection adjustment value (Plain paper, large
size) Longer size than the above 1 to 99 30
M ADU HEAVY PAPER (S) ADU, deflection adjustment value (Heavy paper, small
size) LT size or less 1 to 99 45
N ADU HEAVY PAPER (L) ADU, deflection adjustment value (Heavy paper, large
size) Longer size than the above 1 to 99 45
O DESK(S) DESK, deflection adjustment value (Plain paper, small
size) LT size or less 1 to 99 30
P DESK(L) DESK, deflection adjustment value (Plain paper, large
size) Longer size than the above 1 to 99 30
Q A4LCC A4LCC, Deflection adjustment value – 1 to 99 30
R A3LCC A3LCC, Deflection adjustment value (small size) LT size or less 1 to 99 30
S A3LCC A3LCC, Deflection adjustment value (large size) Longer size than the above 1 to 99 30
Item Button Display item
Description of item (Mode, document, paper feed
speed)
Transport direction
Set
range
Default
value
0
A:
A 㧦 50
B 㧦 50
C 㧦 50
D 㧦 50
㧧 NORMAL_PLAIN_HIGH
㧧 NORMAL_PLAIN_LOW
㧧 NORMAL_THIN_HIGH
㧧 NORMAL_THIN_LOW
SIMULATION NO.51 㧙 02
REGIST ROLLER ADJUSTMENT
50
㨇 1 㨪 99 㨉
OK
TEST
CLOSE
SIDE1 SIDE2 ENGIN